Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | no | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | no | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 426 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64 |
Linear Rotary Motors PR02-52
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | 30 N | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | no | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 426 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 6570 | g |
Moving Mass (Linear) | 1220 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64 |
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | -30 N | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | no | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 426 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 6570 | g |
Moving Mass (Linear) | 1220 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64 |
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | 30 N | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | no | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 426 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64 |
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | 60 N | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | no | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 426 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 6570 | g |
Moving Mass (Linear) | 1220 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64 |
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | -60 N | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | no | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 426 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 6570 | g |
Moving Mass (Linear) | 1220 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64 |
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | 30 N | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | 100 N | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 441 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64 |
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | no | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | 100 N | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 441 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64 |
Hollow Shaft (Option -L) | no | |
Weight Compensation (option -MS) | 30 N | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | 100 N | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 441 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64 |
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | -30 N | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | 100 N | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 441 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64 |
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | 30 N | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | 100 N | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 441 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64 |
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | 30 N | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | 250 N | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 441 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64 |
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | -30 N | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | 250 N | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 441 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64 |
Hollow Shaft (Option -L) | no | |
Weight Compensation (option -MS) | no | |
Torque Sensor (option -TS) | no | |
Force Sensor (option -FS) | no | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 426 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64 |
Hollow Shaft (Option -L) | no | |
Weight Compensation (option -MS) | 30 N | |
Torque Sensor (option -TS) | no | |
Force Sensor (option -FS) | no | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 426 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64/IP67 (front flange) |
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | no | |
Torque Sensor (option -TS) | no | |
Force Sensor (option -FS) | no | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 426 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64/IP67 (front flange) |
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | 30 N | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | no | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 426 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64 |
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | 30 N | |
Torque Sensor (option -TS) | no | |
Force Sensor (option -FS) | no | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 426 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64/IP67 (front flange) |
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | -30 N | |
Torque Sensor (option -TS) | no | |
Force Sensor (option -FS) | no | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 426 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64/IP67 (front flange) |
Hollow Shaft (Option -L) | no | |
Weight Compensation (option -MS) | no | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | no | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 426 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64/IP67 (front flange) |
Hollow Shaft (Option -L) | no | |
Weight Compensation (option -MS) | 30 N | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | no | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 426 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64/IP67 (front flange) |
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | no | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | no | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 426 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64/IP67 (front flange) |
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | no | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | 100 N | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 426 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64 |
Hollow Shaft (Option -L) | yes | |
Weight Compensation (option -MS) | 30 N | |
Torque Sensor (option -TS) | 2.5 Nm / ±10 V | |
Force Sensor (option -FS) | no | |
Technical Data Linear Part | ||
Max. Stroke | 100 | mm |
Max. Force | 255 | N |
Continuous Force | 51 | N |
Max. Velocity | 3.9 | m/s |
Position Repeatability | ±0.05 | mm |
Motor Cable | ||
Supported Drives | ||
Technical Data Rotary Part | ||
Max. Torque | 2.2 | Nm |
Constant Torque (Halt) | 0.47 | Nm |
Max. Number of Revolutions | 1500 | rpm |
Repeatability | ±0.1 | ° |
Motor Cable | ||
Supported Drives | ||
Mechanical Data | ||
Length | 426 | mm |
Width | 50 | mm |
Height | 135 | mm |
Mass | 5680 | g |
Moving Mass (Linear) | 1075 | g |
Axle Diameter | 12h9 | mm |
Protection Class | IP64/IP67 (front flange) |