Force Sensors for DM Linear Modules

Select order:

Numbers of articles:

Choose list type:

‌
Technical data
Range	50 N (11.24 lbf)
Direction	Pull&Push
Linearity & Hystersis	< 1 %FS
Min. Calibartion	1 %FS
Zero Point Deviation	< 100 mV
‌
Mechanical data
Length	47.5 mm (1.87 in)
Width	50.4 mm (1.98 in)
Height	72 mm (2.83 in)
Mechanical Overload (Push)	200 %FS
Mechanical Overload (Pull)	200 %FS
Nominal Measuring Range	0.02 mm (0.0008 in)
Weight	242 g (0.53 lb)
Protection Class	IP40 (higher protection class on request)

The article has been added to the shopping list.

Art.-Nr.: 0150-5356
Force Sensor for DM01-23 Guide, +-50N, incl. accessories

‌
Technical data
Range	100 N (22.48 lbf)
Direction	Pull&Push
Linearity & Hystersis	< 1 %FS
Min. Calibartion	0.5 %FS
Zero Point Deviation	< 100 mV
‌
Mechanical data
Length	73.5 mm (2.89 in)
Width	70.4 mm (2.77 in)
Height	100 mm (3.94 in)
Mechanical Overload (Push)	1000 %FS
Mechanical Overload (Pull)	300 %FS
Nominal Measuring Range	0.02 mm (0.0008 in)
Weight	1040 g (2.29 lb)
Protection Class	IP40 (higher protection class on request)

The article has been added to the shopping list.

Art.-Nr.: 0150-6120
Force Sensor for DM0-37 Guide, +-100N, incl. accessories

‌
Technical data
Range	250 N (56.2 lbf)
Direction	Pull&Push
Linearity & Hystersis	< 1 %FS
Min. Calibartion	0.5 %FS
Zero Point Deviation	< 100 mV
‌
Mechanical data
Length	73.5 mm (2.89 in)
Width	70.4 mm (2.77 in)
Height	100 mm (3.94 in)
Mechanical Overload (Push)	1000 %FS
Mechanical Overload (Pull)	300 %FS
Nominal Measuring Range	0.02 mm (0.0008 in)
Weight	1040 g (2.29 lb)
Protection Class	IP40 (higher protection class on request)

The article has been added to the shopping list.

Art.-Nr.: 0150-6121
Force Sensor for DM01-37 Guide, +-250 N, Cal. Class B, IP40

‌
Technical data
Range	250 N (56.2 lbf)
Direction	Pull&Push
Linearity & Hystersis	< 1 %FS
Min. Calibartion	0.5 %FS
Zero Point Deviation	< 100 mV
‌
Mechanical data
Length	77 mm (3.03 in)
Width	85.4 mm (3.36 in)
Height	137 mm (5.39 in)
Mechanical Overload (Push)	1000 %FS
Mechanical Overload (Pull)	300 %FS
Nominal Measuring Range	0.02 mm (0.0008 in)
Weight	1720 g (3.79 lb)
Protection Class	IP40 (higher protection class on request)

The article has been added to the shopping list.

Art.-Nr.: 0150-6122
Force Sensor for DM01-48 Guide, +-250N, with accessories

‌
Technical data
Range	500 N (112.4 lbf)
Direction	Pull&Push
Linearity & Hystersis	< 1 %FS
Min. Calibartion	0.5 %FS
Zero Point Deviation	< 100 mV
‌
Mechanical data
Length	77 mm (3.03 in)
Width	85.4 mm (3.36 in)
Height	137 mm (5.39 in)
Mechanical Overload (Push)	1000 %FS
Mechanical Overload (Pull)	300 %FS
Nominal Measuring Range	0.02 mm (0.0008 in)
Weight	1720 g (3.79 lb)
Protection Class	IP40 (higher protection class on request)

The article has been added to the shopping list.

Art.-Nr.: 0150-6125
Force Sensor for DM01-48 Guide, +-500N incl. accessories


For LinMot Linear Motors with D-connector

Temperature range		-20 ...+70 °C
Materials according to		UL / CSA 300V

Cable diameter		8.9 mm
Cable weight		106 g/m
Max. cable length		50 m

Min. bending radius stationary		45 mm
Min. bending radius moving		90 mm
Torsion moving		not allowed

The article has been added to the shopping list.

Art.-Nr.: 0150-5359
Sensor-extension cable for DM01-FSxx, drive side open end

« Back | Page 1 of 1 | 6 items | Next »